The new designs incorporate cluster management technology, whereas the LEDs are fixed onto PCB boards forming clusters which are then welded together and extruded in a food grade silicone to form the actual strip lighting, these PCB boards are connected in parallel with the electrical circuit working together in synergy as a lighting platform, but independently in the unlikely case of failure, this means if there is a failure on any components of the lighting it would be isolated and not affect the remaining lighting system.
Plug and play system
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED section. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of LED strip – it's that simple.
Maintenance-free. Easy to repair.
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.
• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.
• AC to DC convertors, miniature voltage convertors.
• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.
Dimension: 10000mm(length） *20mm(width） *10mm(height）
|LED configuration||60 LED's spaced evenly over a metre length|
|Range fed from both sides||40 metres|
|Recommended fixing height||5 - 6 Metres|
|Power Consumption per LED||0.25 Watts|
|Power Consumption per Metre||15 Watts|
|Colour Rendering Index CRI||> 80|
|Colour temperature||6500 Kelvin|
|Luminous Efficacy||80 Lumens / Watt|
|Voltage on lighting VDC||36 VDC|
|Supply voltage for power controllers VAC||85 - 265 VAC|
|Light maintenance||15%-20% Drop over 4 years|
|Lifespan||5 Years +|
|Warranty Lighting||3 Years|
|Outer covering||Food grade silicone|
|Dimensions||10000mm(length） *20mm(width） *10mm(height）|
|Operating temperature||-40℃ to 120℃|
|Protection||Short Circuit |